E-Clip

E-Clip, also known as E-Type Retaining Ring, E-Ring, External Retaining Clip, Shaft E-Clip, Retaining Washer or DIN 6799 E-Clip, is a small retaining component used to hold parts in position on shafts, pins, axles and grooves.

Unlike a screw or nut, an E-Clip does not use thread. It is installed radially into a groove on a shaft or pin. Once installed, the E-shaped clip helps retain washers, gears, rollers, levers, linkages, spacers, wheels and other components from sliding off the shaft.

E-Clips are commonly used in machinery, automotive-light assemblies, small motors, linkages, shafts, pins, rollers, hinges, appliances, tools, fixtures, equipment repair and general industrial maintenance applications. They are useful when a compact, low-cost and removable retaining method is required.

Material:

• Spring Steel , Stainless Steel 304 (A2)

Dimensions:

Key Features:

• E-type retaining clip for shafts, pins and grooves
• Also known as E-clip, E-ring, external retaining clip or DIN 6799 retaining washer
• Installed radially into a shaft groove
• Helps retain components against axial movement
• Compact design suitable for small shafts and limited-space assemblies
• Removable and replaceable during maintenance work
• Spring Steel option suitable for strong spring retention in general applications
• Stainless Steel 304 (A2) option suitable for better corrosion resistance and cleaner appearance
• Useful for rollers, gears, washers, levers, linkages, pins and small mechanical parts
• Practical for maintenance, repair, replacement, production assembly and project supply

Applications:

E-Clip is commonly used in:

• Shaft and pin retaining applications
• Roller and wheel retention
• Linkage and lever assemblies
• Gear and spacer retention
• Washer and bushing retention
• Small motor and equipment assembly
• Automotive-light mechanical components
• Machinery assembly and maintenance
• Appliance and tool assembly
• Hinges, pivots and axle parts
• Jig and fixture applications
• Factory maintenance and MRO work
• Workshop repair and replacement work
• General commercial and industrial fastening applications

Common Related Names

E-Type Retaining Ring

• A technical name for E-shaped retaining clips installed into shaft grooves.

E-Ring

• A short trade name commonly used for E-clips in hardware and machinery repair.

External Retaining Clip

• Used because the clip is installed externally onto a shaft or pin groove.

Shaft E-Clip

• Used when the clip is selected to retain parts on a shaft.

DIN 6799 Retaining Washer

• A standard-related name commonly used for metric E-clips.

Why Choose Our E-Clip

Choosing the correct E-Clip is important for shaft retention, groove fitment, spring force, corrosion resistance and long-term assembly reliability. The clip should match the shaft diameter, groove size, material, installation clearance, axial load and working environment.

Spring Steel E-Clip is a practical option for general machinery, shafts, pins, rollers, linkages, small motors, tools, appliances, equipment repair and industrial maintenance applications. Stainless Steel 304 (A2) E-Clip is suitable when better corrosion resistance, cleaner appearance and stainless steel material compatibility are required.

The main advantage of an E-Clip is fast radial installation. It can be installed into a groove from the side of the shaft, which makes it useful when there is limited access at the end of the shaft. It also saves space compared with some threaded locking methods.

E-Clips are commonly used to prevent components from moving axially along a shaft. They are suitable for retaining washers, gears, rollers, wheels, spacers, levers, pins and small mechanical components. Because they are removable, they are useful for equipment that may require future maintenance or replacement.

For best performance, the shaft groove should be machined correctly and the clip should match the groove specification. Over-spreading, wrong size selection or poor groove design may reduce retaining performance. For high-speed, high-load, safety-related or critical assemblies, groove design, clip size, material and retention load should be checked by a qualified person or project specification.

We supply E-Clip for machinery users, factories, maintenance departments, automotive-light repair users, small motor users, equipment manufacturers, appliance repair users, tool repair users, jig and fixture makers, metal fabricators, engineering companies, workshop users, hardware resellers and industrial customers in Selangor, Kuala Lumpur and across Malaysia, including Klang, Shah Alam, Puchong, Petaling Jaya, Subang, Port Klang, Balakong, Cheras, Kajang, Rawang, Semenyih, Ampang, Banting, Putrajaya, Cyberjaya and Seremban.